![]() |
Re: H3 Suspension Problem?
THey took some gas out of the tank so it didn;t lean so much? Added some sand bags to one side? I don;t see how you can adjust the rear. The front, that's easy with teh Tbars. But what is there to adjust in the rear?
TAIL RATED!
Re: H3 Suspension Problem?
This evening I was able to make it right on each side. My wife doesn't normally notice things like that but even she saw how lopsided it was the other day.
I wrote down all the measurements, marked the bolt, marked the same line on the socket. Took some up and down on each side adjusting.
I have all 4 corners within 1/4 an inch of each other. The rears are actually almost dead on but the front is the 1/4 of an inch. I will drive it and re-check.
I only have about 100 miles on it. Once I get 500 miles on it I'll tell them I feel it needs an alignment and get it done.
Don't be shy to fix it on your own. I had it done and looking back at my nicely fixed vehicle in about an hour.
Re: H3 Suspension Problem?
Some of them got assembled while they were supported somehow. If you loosen the spring shackle bolts and shake and bounce the vehicle it will let the springs adjust.
Traded 06 I-5 for 08H3 ALPHA/Adv,WarnPowerPlant9500,Warn 9000ti rear,Steelcraft brush/winch mt,RockyRoadrails/Hunner mod,GMUCP,Hunner rear/shock skids,OEM roof lights,Rola rack,2GoLights,Hunner steering gear mount,Purple Cranium diff guard,BulletProof tie rods,ARBsnorkle, SyKlone prefilter,Hunner intake pipe.
Re: H3 Suspension Problem?
Now is it possible that that would cause it to pull to the right? Seems as though I now have a slight pull to the right and occationally pulles hard when breaking...not all the time though????
Thread Tools
Search this Thread
Display Modes
Posting Rules