Got Warrior Products Shackles On... Nice!

[wpage]

Stock Shock showing + measurement exposure other elements are happy...

[wpage]

New & better profile...



Thats all Folks!!

[wpage]

Just a final note. There are other ways to install the shackles that are probably safer than what I showed here.
I will say that the quality of the warrior product was great. All the hardware was included and directions. The bolts fit well and the nuts were the locking type so they wont shake off. I recomend them highly.

WWW.WarriorProducts.com

Thanks for all the other usefull posts from other on shackles that were a big help when questions arose! Sewie and HumBebe to name a few...

[tomp]

I am finding your numbers above hard to understand. So how much did it raise the rear total?

[wpage]

Originally Posted by tomp

I am finding your numbers above hard to understand. So how much did it raise the rear total?

Settled in Little better than 1/2" after a few.

[Jason @ Warrior]

Woody,

Thank you for your kind words and very helpful information.

We've decided to go ahead and add part numbers to our product line specifically for the H3. We have two shackles available, in two finishes, totaling 4 part numbers. Note that these part #'s rate these heights, but they may vary slightly, just because of the uncontrollable factors like spring wear.

1. Part #154 - Hummer H3 0.5" Lift Shackle - Powder Coated Hammertone Grey
2. Part #354 - Hummer H3 0.5" Lift Shackle - Gold Zinc Plated
3. Part #128 - Hummer H3 1.25" Lift Shackle - Powder Coated Hammertone Grey
4. Part #328 - Hummer H3 1.25" Lift Shackle - Gold Zinc Plated

If you could, can you send me in email some larger versions of the pictures you posted? We'd like to get a press release out and get some of our dealers to start listing these parts so they're more accessible to you guys.

Two more questions: What models years has the H3 run so far, so that I can get that information out too? Also, what rear axle is in this SUV?

[wpage]

Originally Posted by Jason @ Warrior

Woody,

Thank you for your kind words and very helpful information.

We've decided to go ahead and add part numbers to our product line specifically for the H3. We have two shackles available, in two finishes, totaling 4 part numbers. Note that these part #'s rate these heights, but they may vary slightly, just because of the uncontrollable factors like spring wear.

1. Part #154 - Hummer H3 0.5" Lift Shackle - Powder Coated Hammertone Grey
2. Part #354 - Hummer H3 0.5" Lift Shackle - Gold Zinc Plated
3. Part #128 - Hummer H3 1.25" Lift Shackle - Powder Coated Hammertone Grey
4. Part #328 - Hummer H3 1.25" Lift Shackle - Gold Zinc Plated

Jason,
Your welcome.
Glad to hear that warrior products is taking the initiative to offer products to the Hummer H3 community.
We H3 owners find it frustrating at times looking at all the aftermarket products out there. Then wondering if they adapt to our needs

If you could, can you send me in email some larger versions of the pictures you posted? We'd like to get a press release out and get some of our dealers to start listing these parts so they're more accessible to you guys.

Two more questions: What models years has the H3 run so far, so that I can get that information out too? Also, what rear axle is in this SUV?

Sending you a PM

J

If you could there are some other items/products that we would like to see offerd. Maybe your design folks could develop a rack that sits over the spare tire in the back!

Thanks for looking

[evldave]

Originally Posted by Jason @ Warrior

Woody,

Thank you for your kind words and very helpful information.

We've decided to go ahead and add part numbers to our product line specifically for the H3. We have two shackles available, in two finishes, totaling 4 part numbers. Note that these part #'s rate these heights, but they may vary slightly, just because of the uncontrollable factors like spring wear.

1. Part #154 - Hummer H3 0.5" Lift Shackle - Powder Coated Hammertone Grey
2. Part #354 - Hummer H3 0.5" Lift Shackle - Gold Zinc Plated
3. Part #128 - Hummer H3 1.25" Lift Shackle - Powder Coated Hammertone Grey
4. Part #328 - Hummer H3 1.25" Lift Shackle - Gold Zinc Plated

If you could, can you send me in email some larger versions of the pictures you posted? We'd like to get a press release out and get some of our dealers to start listing these parts so they're more accessible to you guys.

Two more questions: What models years has the H3 run so far, so that I can get that information out too? Also, what rear axle is in this SUV?

Hey I see you guys are in Tualitin. I live in Vancouver and have an '06, and would be happy to use my H3 as a test mule if you plan on fabbing anything up. Other than a dent in the p/s front door, a trashed rear plastic piece, cracked windshield and tons of trail rash, it would make a great truck for advertising pictures when you fab me up some rock rails, UCP, and a rear tire rack

[Sewie]

Originally Posted by Jason @ Warrior

We've decided to go ahead and add part numbers to our product line specifically for the H3.

Jason,

Great news. I put your shackles on a couple months ago and I just received a set of your shock conversion mounts. Hopefully you guys will come up with some new stuff for us, or at least cross-reference some of your existing products that will fit.