 |
|
04-04-2008, 06:56 PM
|
 |
Hummer Authority
|
|
Join Date: Sep 2003
Location: Canada
Posts: 1,251
|
|
Re: Canlt Get Key Out!!
The shifter button is likely sticking inside the shift shaft and not releasing. With the shifter handle off use a screwdriver and push down on the center and see if it goes down and then back up. If you have spilled coffee or any other kinds of drinks in the cupholders this gets gummed up. try cleaning it out with brake clean and lubricate with lithium grease. If it wont free up you may need a shifter assembly
|
04-05-2008, 03:09 PM
|
|
Hummer Veteran
|
|
Join Date: Apr 2003
Location: Dover, NH
Posts: 71
|
|
Re: Canlt Get Key Out!!
My 05 did the same thing. I took it to the dealer and they swapped out the ignition mechanism with a new one under warranty. Fixed it.
|
04-07-2008, 08:18 PM
|
 |
Hummer Expert
|
|
Join Date: Jan 2006
Location: chicago
Posts: 724
|
|
Re: Canlt Get Key Out!!
here's the update on this situation.... Turned out to be a bad lock cylinder. $32.00 dollar part. 
__________________
2003 H2 Lux Series. Murdered Out! 20x10 Eagle Wrapped with Nitto Mud Grapplers 35x12.5x20 Full tint including windshield, full LED interior, K&N Intake, HID Headlights & Fogs, Plasti Dip Skid plate & front/back Lower Bumpers, List goes on!
|
04-07-2008, 08:45 PM
|
|
Hummer Authority
|
|
Join Date: Sep 2003
Location: Canada
Posts: 1,251
|
|
Re: Canlt Get Key Out!!
If it was the lock cylinder then hitting the release button on the shifter assembly would not have done anything.
|
04-14-2008, 05:51 PM
|
|
Hummer Expert
|
|
Join Date: Jan 2006
Location: chicago
Posts: 724
|
|
Re: Canlt Get Key Out!!
Quote:
|
Originally Posted by HUMTECH
If it was the lock cylinder then hitting the release button on the shifter assembly would not have done anything.
|
Hummtech..... Guess what? You were right!!!!!  It happened to me again 2 days later. Maybe it is a shifter assembly that I need??????? AHHHHHHH... help again. This SUKS!!!
__________________
2003 H2 Lux Series. Murdered Out! 20x10 Eagle Wrapped with Nitto Mud Grapplers 35x12.5x20 Full tint including windshield, full LED interior, K&N Intake, HID Headlights & Fogs, Plasti Dip Skid plate & front/back Lower Bumpers, List goes on!
|
04-15-2008, 12:10 AM
|
|
Hummer Authority
|
|
Join Date: Sep 2003
Location: Canada
Posts: 1,251
|
|
Re: Canlt Get Key Out!!
I would double check the wires to the shifter assembly. 4 wire connector at the back right side of the assembly. Pull on each wire there may be a partial break inside the insulation which is hard to see. Other than that best guess without seeing the truck would be the shifter assembly as parts are non servicable.
|
04-15-2008, 03:53 AM
|
|
Hummer Expert
|
|
Join Date: Jan 2006
Location: chicago
Posts: 724
|
|
Re: Canlt Get Key Out!!
Quote:
|
Originally Posted by HUMTECH
I would double check the wires to the shifter assembly. 4 wire connector at the back right side of the assembly. Pull on each wire there may be a partial break inside the insulation which is hard to see. Other than that best guess without seeing the truck would be the shifter assembly as parts are non servicable.
|
there's 2 wires that are cut.... a green and i think a blue one? I think it was cut to bypass the video for my screen in front? I have a video switch to turn my screen on/off when I need to. BUT, if its the way the installer did it, its been like that for years with no problem. 
__________________
2003 H2 Lux Series. Murdered Out! 20x10 Eagle Wrapped with Nitto Mud Grapplers 35x12.5x20 Full tint including windshield, full LED interior, K&N Intake, HID Headlights & Fogs, Plasti Dip Skid plate & front/back Lower Bumpers, List goes on!
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 01:33 AM.
|
