-06 torsion bars,keys,bolts or something else different than -03 ?

[SummitUp]

I and others have experienced just the opposite: Passenger side turned in more... Read this thread I started <HERE>.

[Hammer]

With stock keys how far would you crank torsion key bolts- I would like have most comfortable ride

Rancho installation manual says: "Verify that the front spindle to fender height is 28.5" and that both sides are equal..."






My truck is -03 with rancho 4" lift, 9000xl shocks and RCX system to control shocks from cabin.

[SummitUp]

You've already lifted your ride 4", so assuming your ride is level side to side there's really no point in changing your torsion bar adjustment. Also changing the adjustment too much can require a wheel re-alignment.

[Hammer]

I have to do a wheel re-alignment anyway ... My point was to get truck level Front - Rear but it seems to affect ride comfort too much .

I just measured front is both sides 30.5" and rear 34" both sides.

I would like to know how much other H2?s have so please post yours.

front spindle height ?

[SummitUp]

You got it, your drawing is correct. Make sure the 28.5" dimension is for a Hummer H2!

[Hammer]

height is from ranchos 4" lift installation manual for Hummer H2 !

[Hammer]

If I adjust it back to ranchos recommend I have 5.5" more height at the back when rear air suspension activated .