![]() |
Re: Chassis Lube Points
Later, Easy Ed
Re: Chassis Lube Points
Who knows for sure?
Re: Chassis Lube Points
-rear tire carrier
-2 on upper control arms
-2 on lower control arms
-1 on Idler Pivot assembly
-1 on Idler Arm
-1 on Pitman Arm
-2 on tie rod outers
-2 on tie rod inners
Mine has two additional on the rear Edelbrock Panhard Rod and then 4 more on my Cognito Upper Control arm bushings. However, I have the uniball upper control arms which eliminates the upper ball joints so that deducts 2. Also, my Cognito Idler pivot assembly does not have one either. Total: I have 15
H2 SUT 4.56 Gears, Front Locker, Cognito Pitman/Idler kit & Idler Pivot Kit, Fab Tech Tie Rods, True Tech Trailing Arms, Edelbrock Panhard Rod, PML rear Diff & Tranny Pans, Corsa Exhaust, Dynatech LT Headers, Diablo Predator Programmer, Volant CAI, Warn 9500 Winch, Escort 8500x50 & ZR3 Laser Shifter, Delta Light Bar, Rancho Steering Stabilizer & Bilstein Shocks, Ron Davis Radiator, PowerSlot Rotors, Hawk Brake Pads
Re: Chassis Lube Points
Excellent! Thanks for the detailed info. Ok, I definitely missed one on the last lube. Good to know....
Re: Chassis Lube Points
Paul
Re: Chassis Lube Points
How much of PIA is it to get to these do you have to take off the tires?
Re: Chassis Lube Points
You do not have to remove the tires. You will need to turn them one way and then the other to get at the lower ball joints on either side.
Thread Tools
Search this Thread
Display Modes
Posting Rules