rod hall h2 sut???

[Hummer Guy]

For what it's worth -- after spending 4 days with Team HUMMER -- I can tell you that Mav is spot on (he should be...I'm pretty sure he was there).

I ran the pre-run of Terrible's town with Chad Hall in an H2 and saw Rod Hall pre-run in a bone-stock H3...so to say the Halls just show up and race is false.

Someone asked about the steering wheel -- it has to be stock, just like the dash (minus the radio, etc).

[ROX]

Originally Posted by Hummer Guy

For what it's worth -- after spending 4 days with Team HUMMER -- I can tell you that Mav is spot on (he should be...I'm pretty sure he was there).

I ran the pre-run of Terrible's town with Chad Hall in an H2 and saw Rod Hall pre-run in a bone-stock H3...so to say the Halls just show up and race is false.

Someone asked about the steering wheel -- it has to be stock, just like the dash (minus the radio, etc).

[r3run33]

maverick thanks agin for the info i knew you guys where close to stock and was just curious about the shocks etc so wait the tie rods are stock??? i'm not trying to make a fight but i thought this was the weakest link on the rig and from the vids i seen of the sut running they are not babying that unit at all. some of those ruts were takin at a good speed. i really do appreciate the info and good luck next week.

[r3run33]

ok so i seen a write about about a h2 similar to rod hall sut; its a reno hummer dealerships race truck. fairly stock except for cage and some fox shocks similar to the sut (actually the same) now they change the tie rods with a unit from a company called samco; any one know these guys?? they also had a special knuckle made up had brass bushings I will try to get the mag today and scan a pic and then post it.

[Hummer Guy]

Originally Posted by r3run33

ok so i seen a write about about a h2 similar to rod hall sut; its a reno hummer dealerships race truck. fairly stock except for cage and some fox shocks similar to the sut (actually the same) now they change the tie rods with a unit from a company called samco; any one know these guys?? they also had a special knuckle made up had brass bushings I will try to get the mag today and scan a pic and then post it.

the tie rods are stock -- Samco is run by Sam Cothrun, the co-driver and pit crew chief for the H2 SUT...

[r3run33]

no it had a pic of the new piece it looked nice much more sturdy i have not had time to go get the mag either off road mag or something the cover has a ford f250 on it and the top banner has a pic of the h2 (color grey)