A LITTLE less Bling!

[Knass34]

This is the rim I've gone with. It's ATX Vice, 20x10 with 0 offset. I don't know what backspacing is so I'm not sure what it would be for this wheel.

[FGHT ON]

See if you can call or somehow find out the backspacing. The offset isn't going to tell you how far the wheel is going to stick out. That may help you decide on the width of the tire you are looking for.

[Knass34]

Originally Posted by FGHT ON

See if you can call or somehow find out the backspacing. The offset isn't going to tell you how far the wheel is going to stick out. That may help you decide on the width of the tire you are looking for.

Ok, from the American Racing website, They list that wheel as:
Size - 20x10
Offset - 0
Backside - 5.500

The tire is approx 13" wide, what's your opinion?

Kal

[FGHT ON]

You should be fine, just know that they are going to stick out a bit farther and they MAY rub on full turn, depends on your rig.

[Knass34]

Originally Posted by FGHT ON

You should be fine, just know that they are going to stick out a bit farther and they MAY rub on full turn, depends on your rig.

I'm not very experianced with changing tire sizes on vehicles from OE sizes
Where, per say, do you think they would rub? Front fenders? Inner wheel well?

Kal

[FGHT ON]

Most likely they will rub the back (closest to the cab) of the inner wheel well in the front. The back, outer corner. Be careful becuase it can cut your tire as well as possibly rip the inner lining out. If it is minor you can always turn the torsion bars a half crank or so, not much more

You won't come close to the front of the wheel well

[Knass34]

FGHT ON, I can't thank you enough for all your advice. You've been kind to share your knowledge and experiance with larger tires, and it's appreciated. I will post pics as soon as the wheels arrive. Hopefully they'll turn out great!

Regards,

Kal