Vibration noise...

[pdsq99f4]

Check to make sure that all 4 nuts are on the exhaust manifold heat shield. Sometimes these work their way loose and fall off. As far as the brakes go, you need the rear rotors turned.

[Big Dad]

Thanks for the input!

The loose heat sheild was the culprit for the vibration.

The grind noise is rear suspension noise as the weight of the vehicle shifts forward. Rotors were fine.

[pdsq99f4]

When you say the rotors are fine, did you just look at them? If it's grinding just before you come to a hard stop, the rotors need to be turned. You can't "see" anything wrong with them.

[Big Dad]

Sorry for the late reply, the dealer did.