|
#3
08-28-2008, 05:24 AM
Hummer Professional
Join Date: Sep 2006
Location: Arkansas
Posts: 363
Re: dealer decals
Another method
I use a heat shrink gun, gets hotter than a hair dryer. Start off with a low setting and work up carefully. Use just enough heat to soften the letters. Keep it moving. When some letters start to lift use a PLASTIC tool or your credit card with the highest balance. Gently push the letters off. Do not use a razor blade. It will dig into the paint even if you are real careful, stuff happens. Lacquer thinner cuts adhesive and leaves no residue and will not harm the paint.
I did not get any advertising fee either.
Just be glad they quit drilling holes and putting on chrome ones!!
__________________
Traded 06 I-5 for 08H3 ALPHA/Adv,WarnPowerPlant9500,Warn 9000ti rear,Steelcraft brush/winch mt,RockyRoadrails/Hunner mod,GMUCP,Hunner rear/shock skids,OEM roof lights,Rola rack,2GoLights,Hunner steering gear mount,Purple Cranium diff guard,BulletProof tie rods,ARBsnorkle, SyKlone prefilter,Hunner intake pipe.
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 10:37 PM.
Threaded Mode