Cooling Fan Removal

[TRUBRIT]

Seeing as we are on the subject. Here is the info on the most popular equipment to install. 2500 HD Fan kit - Flexlite
listed as chevrolet parts:
shroud: GM 89023365
motor: GM 89023368 [need 2]
ACD 15-80551
Blade: GM 89023366 [need 2]
ACD 15-80682
if you need the connector: GM 88987983 [need 2]
ACD # PT1767
$481 with shipping
Nelson Performance wiring harness $100 w/shippin

[Gunzz]

Will this new fan setup be controlled through the trucks computer ? I know when I use my Diablo tuner there are options for turning this on and adjusting temps I think. I also seem to remember reading that there is a wire for this hookup somewhere in the wiring harness. Anyone know if this is true?

[Metallic Red]

[HUMMERcustoms.com/TAZ]

The factory electric fan setup is the only way to go. Once wired in you can control fan on/off temp with computer.

I wish I could divulge the low cost the factory parts can be gotten for if you have connections. Price is way less than mentioned here although the Nelson harness will cost the same. The 2500HD fan parts can be purchased individually and will all be true GM parts. Just think about people you know or maybe you have a good relation with dealer parts guy.

You would be so much happier with the same unit that is used on the Escalade.

Good Luck

TAZ

Originally Posted by TRUBRIT

Seeing as we are on the subject. Here is the info on the most popular equipment to install. 2500 HD Fan kit - Flexlite
listed as chevrolet parts:
shroud: GM 89023365
motor: GM 89023368 [need 2]
ACD 15-80551
Blade: GM 89023366 [need 2]
ACD 15-80682
if you need the connector: GM 88987983 [need 2]
ACD # PT1767
$481 with shipping
Nelson Performance wiring harness $100 w/shippin