mirror display dead

[axxense]

You guys are right....

The guy did the whole job, including labor, for $195. I figured it was so inexpensive - and he did a 'good' job (good, if the mirror wasn't torqued) - that I was hoping for some quick reset trick from the forum. Wouldn't have to bust his chops, no harm, no foul, and I would be good to go.

Here is why you guys are totally on the mark - I removed the mirror to get a better angle on the connector to check for bent pins or something - all was ok - as I followed the loom upwards, right where they meet the windshield and go into the headliner at the back of the console, there are a couple of cut wires.

You get what you pay for, I suppose. Anyway, just got off of the phone with him - he will be having a tech come out to fix it up.

Thanks again, to all and the forum, though, I probably should have done what you guys said in the first place - just told him, it was fine, now it isn't - effin fix it (without bugging the forum).

[HummerJim]

I didn't have that problem, but they failed to secure the plastic side pieces with mastic or double sided tape after they replaced my windshield and it made a very loud buzzing noise. They were good about coming back and fixing it, even though I thought it was the sunroof deflector at first. WOW! 195 is a good price, I paid 405 for mine installed!

[Gunzz]

Take your mirror off and then check the connections on the back. Maybe they removed the plug and when putting it back on bent or broke one of the pins.

[Dan D 2]

Don't touch anything!!! Bring it back and have them fix it.