2 Inch Lift on H2.

[tomp]

Mark, all you need to do is take verify the shock extension brackets are not too tall. They most likely are too tall and if they are, they can be easily modified.

Originally Posted by OrangeCrush

Man, I appreciate your input. Before I start all this, I'm looking into another lift kit. The reason is because by the time I buy control arms, new shocks, I'll have 1200-1400 bucks in it. If I'm spending that much because of a levelling kit, I'd just as well be better off buying a smaller suspension lift kit. Thoughts/opinions?

Like I said earlier, I didn't want to get a 6" kit simply because that will require taller tires, gears, etc, etc.

....unless of course, I can install a 6" and lower it a bit? Is that possible? I'm assuming that a 6" kit is with the torsion bars cranked up to a certain amount.... what if you didn't crank them that far? Is 6" the minimum you could go?

I talked to a dealer for Cognito and he said they made a 4" kit for the H2.

I looked it up and didn't see anything but did see a 4" kit for an HD2500. Are the front suspensions the same?

Thanks again,

Mark