Boulder Bumper/Winch on H3T

[Nips]

I put on the same one you bought. There are only a few simple mods which are documented in the instructions. You have to trim a plastic shield on the front, trim your fender liners, and you have to use a '07 skid plate. It bolts rather easily to existing holes. They forgot to send me the mounting hardware so be sure to check for it before tearing off your old bumper.

I used the stock rims with the bigger tires. I did not change backspacing. They rub a little at full lock but I can live with that.

[Airman84]

thanks, hopefully i get all the instructions and hardware. i'll have to email the guy to make sure he shipped them.