Calibrating Air Suspension....

[HUMTECH]

Measure from the metal flange at the top of the bumpstop to where the bumpstop contacts the diff housing. Yes you can just set it at this height by lifting on the bumper hitch and calibrate from there

[agood1]

Thanks, I'll give it a try and post the results.

[agood1]

Done,

I used the voltage readings on the height sensors to get it where I wanted it....maybe a little below stock, but it should work.
My readings before were 2.87 and 2.94
Now they are 2.18 and 2.22. And you can actually tell a difference when you hit the ride height adjustment button....and the voltages go to 3.04 and 3.06
Thanks for all your help.