SUV- Rear Spare Is Off... best way to finish job

[pdxrealtor]

Ok.. so...

the dealer wants just over 400.00 for the OEM chrome piece that goes along the top of the OEM plate location.

Then it will have to be wired up, drilled, etc..

Anyone have any other ways they could share?

[twr]

Hi mount your plate in the trailer hitch if you don't tow and plug into the trailer plug in the bumper for the light or on the bumper with a lic. plate light and cover the holes from the removed tire rack. lf you don't you will have to run the wire back up inside the rear hatch. Maybe the plate light wire is already in the hatch but you will have to remove the hatch inside panel to see if its there.

[pdxrealtor]

Originally Posted by twr

Hi mount your plate in the trailer hitch if you don't tow and plug into the trailer plug in the bumper for the light or on the bumper with a lic. plate light and cover the holes from the removed tire rack. lf you don't you will have to run the wire back up inside the rear hatch. Maybe the plate light wire is already in the hatch but you will have to remove the hatch inside panel to see if its there.

Thanks.. I've seen the hitch mount, but I use it too much to mount a plate there.

I've also seen the plate in the 3rd bolt hole that is left over from the tire carrier.... been tossing that one around.

I really like the idea of locating it where it was meant to be. Thanks for the suggestion of checking for the plate wiring there.... that would make it much easier.

I'm waiting on a camera and the lock pic video box to show up and then I will have the Viper smart start/camera system installed. I'll know what's under the rear hatch at that point......

Sounds like this might be unchartered territory...

[HumminNBoatin']

Orr.....

Take the plate light assembly from your old spare tire mount an retrofit it to fit inside of your rear door pocket. (Its not just the chrome piece you are buying for $400....Its the whole plastic pocket.)

You should be able to pull out your existing door pocket and cut holes in it for the lights to shine through. I would just use epoxy to fit it to your door pocket from the inside.

On the rear bumper you are going to need factory tow hooks to finish off the job. And you are pretty much stuck with the holes in the rear bumper that are left over.... However I may be selling my whole rear bumper soon..... I also might have a line on some tow hooks if you are interested.

[pdxrealtor]

Originally Posted by HumminNBoatin'

Orr.....

Take the plate light assembly from your old spare tire mount an retrofit it to fit inside of your rear door pocket. (Its not just the chrome piece you are buying for $400....Its the whole plastic pocket.)

You should be able to pull out your existing door pocket and cut holes in it for the lights to shine through. I would just use epoxy to fit it to your door pocket from the inside.

On the rear bumper you are going to need factory tow hooks to finish off the job. And you are pretty much stuck with the holes in the rear bumper that are left over.... However I may be selling my whole rear bumper soon..... I also might have a line on some tow hooks if you are interested.

I think I'll just end up plugging the hole in the bumper with a rubber plug... that won't bother me too much.

The tow hooks I might take you up on... I've got a couple people interested in my OEM rear tire carrier, which has the hook attachments so the buyer would give me theirs, but if that falls through and I'm ready I'll need them. I hate to buy them though, when I can get them in the OEM tire carrier deal.

I just got the back up cam.. and it's slick. However, I think I'm going to have to have the OEM pocket with the light for it all to work properly.

[twr]

hi stock camera's on a 2008 are in the bumper i am not sure on 2007 down. I have 2 camers one in bumper which plays through the mirror and one in the spare tire on the licence plate that plays through the nav screen. I turn the mirror one off and turn it on to hook to a trailer, so i don't have to hear it slide out all the time i go to reverse. My truck came with the mirror one, then i put the nav unit in and the camera on the spare tire. Its better for veiwing bigger screen but not for trailer hooking up.

[tarheel34]

I did the same thing when I got my H2... Wheat I did was order the Pocket, like mentioned above, from gmpartsdirect.com. I gave around $250 for it. Then I had to order a new wiring harness because the one that is in the lift gate doesn't attach to where the lamps are above the license plate. Then, I had to run power from the marker lights down to the license lamps because the vehicle is not wired that way from the factory.

Then I went on eBay and bought some factory hooks from a 2003 and bolted up in place of the bulky mounts for the rear spare holder.

Next, I went to Lowe's and bought a metal hole plug, primed it, and painted it flat black. When you Armour All the bumper the flat black matches it perfectly.

Before:

After:

Before:

After: