2003 H2 will not start

[Easy Ed]

IGN A 40 A Fuse is for Ignition Switch RUN, START, RUN/START/ACCY, STARTER Relay.

IGN B 40 A Fuse is for Ignition Switch RUN/ACC, RUN/START

CRANK 10 A Fuse is for Ignition Switch, PCM Module

Might also try to swap Park Lamp and Starter Relay to see if that helps in case relay is bad.

And just to be sure, shifter is fully in park ?

Good luck, Ed


Attachment 52170

[adrock353]

IGN A and B are fuse blocks? How can you check them and see if they are blown? What would that look like?

[Easy Ed]

Look for the copper inside to be burnt in two like a regular blown fuse would.

Attachment 52171

Originally Posted by adrock353

IGN A and B are fuse blocks? How can you check them and see if they are blown? What would that look like?

[adrock353]

ok, I will pull those and take a goog look. I just looked those guys over quickly assuming I would see a little black on the top glass. Thanks for the help.

[adrock353]

definately not the fuses

[Easy Ed]

Checked mine first before I asked and it will start in neutral, will yours ?
Just something to check

[adrock353]

yeah I checked trying in neutral and I get the same result...I will let you guys know what I come up with on Saturday. But if you have more suggestions I would love to hear them.

Thanks
Adam