Need some diff help!!

[lx4life]

I talk to jarek m a ton, but I am still having diffcult time getting the inner shaft out, i think I might have broken something cause that thing won't come out. I really dont want to bother Jarek anymore so thats why i am coming to you guys. I have been hitting the hell out of it, but not really applying upward pressure since i dont know how would accomplish it.:twak : There has to be somthign holding it in there maybe a clip or something. I have attached a picture of what i am talking about the cicrcle is what I am having problems with. Is the half shaft(black piece) two different pieces which one is suppose to come out or does all of of come out.

[HUMTECH]

Trya prybar with outward pressure on the shaft and hit it straight in towards the diff with a big hammer. If it dont come out you will need to split the case and ry to pop the clip off he end of the shaft.

[HUMTECH]

Hitting it straight back into the diff sometimes will center the retainer and allow it to pop out

[lx4life]

How do I split the case? I am new to this but love learning new things when I can. Still kinda confused on the prybar thing where do i put teh pry bar to aplly the upward pressure plus be able to hit the shaft or am I suppose to hit the prybar I swear I am getting stupid by the minute.

[HUMTECH]

Pry between the mount and the axle flange.

[lx4life]

ok gotcha! I really think its stuck in there, but I will try again tomorrow. does it need to be unbolted from the diff. before I hit

[HUMTECH]

Nope, it has a retaining ring that seats in a groove on the end. If that ring expands makes it very difficult to get out