 |
|
09-11-2010, 02:11 PM
|
 |
Hummer Veteran
|
|
Join Date: Nov 2008
Posts: 143
|
|
Re: Need some diff help!!
Quote:
|
Originally Posted by twr
hi this is the sealer part #GM P/N 1052942
|
Not to stir anything up or anything but since GM is not in the business of making sealant (we found out whats that all about with DIII episode) and it didn't work the first time when they sealed it, why would you expect a different outcome using a GM part#... again. 
__________________
Missing the times when things where made to last.
|
09-11-2010, 02:32 PM
|
 |
Hummer Expert
|
|
Join Date: Jul 2009
Location: ontario
Posts: 780
|
|
Re: Need some diff help!!
Hi your right gm sealing products are not made by them, they are likely made by permatex or someone else in the business of sealing products. Also you are not stirring anything up. Some parts are machined surfaces and when car companys put things to together at first,[only some parts] they don't use any sealing compond because they think its perfect and won't leak. After being in service for awhile they realized they screwed up and some start to leak. Then it turns into a problem with recalls sometimes or a repair when the customer complains about a leak.
__________________
Thanks Tracy
2008 H2 SUV
Starr Hid projector headlights
Hid lights in the DRL bumper holes
Custom Alum. light bar, 2 Rigid Industries 10 inch Leds
MC2 Roof Light Bar
24 inch Starr 770 Hammer Rims
Gen 6 Lockpick
Gm bluetooth
Front + Rear Camera's
73 Duster 588 ci. B1 injected akly with NOS
Supercharged 2002 Harley, E Glide Classic
2005 Screamin Eagle, E Glide
http://twrbaggersplus.com/
Last edited by twr : 09-11-2010 at 02:47 PM.
|
09-11-2010, 09:04 PM
|
|
Hummer Veteran
|
|
Join Date: Aug 2009
Posts: 84
|
|
Re: Need some diff help!!
Well iused the Ultra Black cause I was thinking the same thing, It went on good and clean I removed any extra once it dried. Man its a PITA to get the diff in having problems putting it on the jack, but I will get it on there had to go ot town this weekend.
|
09-17-2010, 01:33 AM
|
|
Hummer Veteran
|
|
Join Date: Nov 2008
Posts: 143
|
|
Re: Need some diff help!!
use straps.
__________________
Missing the times when things where made to last.
|
09-19-2010, 11:32 PM
|
 |
Hummer Authority
|
|
Join Date: Sep 2005
Location: Texas
Posts: 1,795
|
|
Re: Need some diff help!!
RTV would always eventually leak on my front diff. Had to use GM anerobic stuff to get it to finally stop leaking
__________________
H2 SUT 4.56 Gears, Front Locker, Cognito Pitman/Idler kit & Idler Pivot Kit, Fab Tech Tie Rods, True Tech Trailing Arms, Edelbrock Panhard Rod, PML rear Diff & Tranny Pans, Corsa Exhaust, Dynatech LT Headers, Diablo Predator Programmer, Volant CAI, Warn 9500 Winch, Escort 8500x50 & ZR3 Laser Shifter, Delta Light Bar, Rancho Steering Stabilizer & Bilstein Shocks, Ron Davis Radiator, PowerSlot Rotors, Hawk Brake Pads
|
09-21-2010, 08:09 PM
|
 |
Hummer Expert
|
|
Join Date: Sep 2007
Location: Mason, OH
Posts: 779
|
|
Re: Need some diff help!!
I used RTV on my diff a year ago. no leaks at all. However I replaced my axle seals at the same time and now one of those is leaking. Its a VERY slow leak just enough to keep the diff wet but no pudling on the ground. What a PITA the H2 front diff is! lol
|
09-24-2010, 02:32 AM
|
|
Hummer Veteran
|
|
Join Date: Aug 2009
Posts: 84
|
|
Re: Need some diff help!!
Now I have a leak from the top I think its the vent tube, i suspect i filled the diff too much cause this never happened before. I mean it was a lot that came out I thought the diff was leaking then I looked at the top of driver side shock and noticed alot of fluid.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 06:20 AM.
|
