Nitto tires rubbing on stock H2?

[IRA51]

KEYS ARE NOT NEEDED FOR 1 1/2 ,JUST CRANK THE T BARS . bOTH THE KEYS AND CRANKING THE T BARS WILL RUIN THE NICE RIDE AND MAKE IT ROUGH .

[2010_5thgen]

So just turn the stock torsion keys? Why has everyone been saying to get these green keys?

[IRA51]

what you do is crank the T bars 1/2 turn each and see if it stops rubbing. If not crank them another 1/2 turn if needed . That should do it . You WILL need to go get the alignment checked /done. You want to lift it just enough to stop the rubbing . It's free and works.

[2010_5thgen]

And this is good if i want to run 37's too?

[IRA51]

The more you crank them the ruffer the ride. If I were you I would crank them just enough to stop the 35's from rubbing and call it a day.

[2010_5thgen]

ok so i just got the truck back from the dealership. i had them crank the factory keys and raise the front about 1 ". looks pretty good and drives good so far. no issues here. plan is to get new shocks next year and the 2" spacer kit for the rear and use the green keys i just got. ill lift the front a bit more and hte back, then throw some 37's on! ill post up pics when it stops raining.