03-06 Chevy wiper/fog light switch in Hummer?

[guruerror]

The top and bottom pops out. They simply clip into a single housing that fits in the dash.

EDIT: Now you've got me second guessing myself...I put a toggle switch in my bottom half a few years back and I could have sworn that they popped out. But perhaps I'm confusing them with the Towing and TC switches, 'cause I put a switch in one of those too.

2010_5thgen: does the top and bottom pop out of the Suburban one? If not, then I stand corrected...the H2 one prolly doesn't pop out either. BUT the switches are more than likely compatible; in other words the Suburban rear wiper switch prolly has the same guts as the H2 one and will turn your wiper on and off. Either way...it's a 15 minute job to test.

Actually, I did some poking around on amazon.com and it looks like the part is definitely interchangeable. I ran part number 15143159 and got this: http://www.amazon.com/gp/product/com...au_pf_dp_chart

[2010_5thgen]

Got a switch out of a 03 tahoe. Should be hooking it up this weekend. Ill post pics.

[pdxrealtor]

Subscribed..

[2010_5thgen]

still waiting to install the switch. my buddy is getting the schematics of the wiring to see what wires go where in the factory clip. hopefully well have it up and working this weekend.

[guruerror]

Originally Posted by 2010_5thgen

still waiting to install the switch. my buddy is getting the schematics of the wiring to see what wires go where in the factory clip. hopefully well have it up and working this weekend.

Does the back of the Tahoe switch have one connector or two? If it's got two, you should only have to figure out the wiring for the fog light portion.

[2010_5thgen]

yes, it only has one. and theres 3 open slots for wires. just need to figure out which ones go where and then get it all hooked up. shouldnt take long once we determine which wire goes in which spot.

[2010_5thgen]

just a little update on the new switch conversion.....finally got the right pins for the wiring to work with the stock harness clip. theres apparenlty alot of different sizes with the same numbers. but we got them out of a 03 silverado. they are supposed to be used for the rear wiper , but obviously a silverado has no rear wiper...so they wont be missed.





we hooked the red and white up to the right locations. then tapped into the ground wire in the factory harness.....no lights....so we grounded to the body...no lights.... so everythign is hooked up right...just still not working. SO....we think the switch is bad for the fog light button. so i need to get a new switch. once i get a new one and test it, ill post. this is really turning out to be a pain in the @$$. hopefully this new switch works. i really wanted this to have a stock look.