37x12.5x17 on stock rims

[Indy]

37's should have been on the H2 from the factory. They would only have needed to mod the frame a little bit to make them work without any rubbing on full lock....the stock size is just a bit too small for the big dimensions of the H2.

[jsbihn]

I had a feeling guruerror would have a pic



Definitely the way to go
I know when I finally get ready for new tires on mine, I will be doing the 37s

I am curious if a small spacer would eliminate the rubbing (if you have that) on full lock

[guruerror]

I had a slight rub at full lock with the stock rims. A small spacer would more than likely eliminate the rub. I have no rub at all with my RSs...but the back spacing is an inch less, so there's less wheel under the truck.

[jsbihn]

Yeah I am not a fan of big spacers or generic spacers.
BUT I do think that if you want to get the look without reworking the wheels (stock or otherwise), then it is ok.
Given I am not saying you are saying to do it, I wouldnt put a 1 inch spacer on my wheels.

With that said, truck is bad ass........................ as usual