Road Rhino Bumper, Rubber Duck Brush Guard, E&G Wide Flairs

[[__--MUD--__]]

Originally Posted by Bimmer9938

Did they sell you those bumpers without being fully welded? Great work by the way, but not sure how you are going to adapt the front bumper to work with a 2" body lift???

(unless you cut the frame and raise it up 2" in the front)

Front and rears pre bent in about 30 pieces was $700 carry out in chicago. I have changed a number of things on the kit- whats pictured is about 85% of what you get.

Bumpers would stay in the existing spot. Winch and brush guard are both custom mounted to the frame also. I didn't want to have anything pulling on the bumper itself. I have a filler that would just get welded on top of the bumper. You'd never be able to tell its a filler panel after the welds were ground down and painted. Brush guard would get holes drilled equal height of the body lift to raise that also.

[Humvee21]

Mud, any finished pictures yet?

[HummerJim]

Just one word for all your work - AWESOME! I love it.

[guruerror]

Originally Posted by Humvee21

Mud, any finished pictures yet?

[[__--MUD--__]]

No not done yet. I got the 5.13 gears in the rear, working on the front right now. Waiting for my custom chromemoly steering setup I had made to showup....(everything between the hubs the steering box is chromemoly). Was trying to come up w/ rear corner guards brace. Finally settled on whats pictured below. I'm anal about stuff tying w/ w/ other things. The cut outs in that brack match the tubing radius. There will be a top tube also. I've been working on this truck for 15 months now...

[citiboy]

Wow, can't wait to see the finished version.

[tyler1bo]

Sick..sub'd for more!

[seventwozero]

15 months?! Well.. they don't call em builds for nothin!

It's going to be one badass H2 when you finally finish it up!