leveling kit on H2

[slippy]

One thing that isnt mentioned much is there is alot of variation in every truck with the torsion bars. One guys Torsion lift might just even out the factory rake, while another may be lifting 3" inches up front with spacers in the back.

That'll make a big diffrence in what tires fit....along with backspace/offset/ tire width...

[tyler1bo]

Roush did 38's at one point in time with just a leveling kit..I have no idea if they rubbed or not though. I know from my truck now, I don't see how in the world I could have shoved 38's under it without the lift.

[seventwozero]

Originally Posted by tyler1bo

Roush did 38's at one point in time with just a leveling kit..I have no idea if they rubbed or not though. I know from my truck now, I don't see how in the world I could have shoved 38's under it without the lift.

My 37x13.5 Toyo's scrub the sway bar at full lock, that's with a "green" key t-bar level, not a kit like the Truxx. I've seen "aggressive" leveling kits, that are supposed to give you slightly more lift than kits like the Truxx, you may be able to squeeze 38-38.5's with these, it's hard to say. After reading for a while, every person has different problems with their tire and lift combinations, one persons success will cause issues with another.

If I recall correctly, there is/was a member on this very board that had a H2 on 40's, and didn't have an official lift kit (like that of Fabtec/Rancho). I don't remember the name of the guy, the truck was white though and maybe a friend of Humminboatin', although I could be wrong.

edit: HERE is the rig I'm talking about. The owner says he has 'everything Cognito' up front, to which I assume upper control arms and their steering stuff, plus "green" keys. He's running 39.5" IROK's on stock wheels.

[Big.Z.hummin]

Originally Posted by tyler1bo

Roush did 38's at one point in time with just a leveling kit..I have no idea if they rubbed or not though. I know from my truck now, I don't see how in the world I could have shoved 38's under it without the lift.

Roush's 38s most definitely rubbed and there was only like 20% tread left. my 37's on 17's rub at full crank and thats with the truxxx level kit. seems to be a ride particular kind of thing as stated above. i honestly think 38's with no level would rub like crazy.

[seventwozero]

Originally Posted by Big.Z.hummin

Roush's 38s most definitely rubbed and there was only like 20% tread left. my 37's on 17's rub at full crank and thats with the truxxx level kit. seems to be a ride particular kind of thing as stated above. i honestly think 38's with no level would rub like crazy.

They are really ONLY 1/2" bigger though, but 2" wider, give or take. I've been looking long and hard at the Goodyear MTR-K that are 38x15.5, I mean.. how bad can it really be?! Maybe with some 4.75 backspaced wheels?

[wingn69]

Im running 37in on my H2 with very little rubbing with no leveling kit, lift kit or cranking the the t-bar but am looking at the Truxx leveling kit my self.

[citiboy]

i just bought the toyo mt 38x13.5x18 with rockstar rims, installing them this coming thursday....i'll crank the tb 2" and will install 1.5" rear spacer. Hopefully, i'm good to go...i can live with a little rubbing .

[Hellz]

Originally Posted by citiboy

i just bought the toyo mt 38x13.5x18 with rockstar rims, installing them this coming thursday....i'll crank the tb 2" and will install 1.5" rear spacer. Hopefully, i'm good to go...i can live with a little rubbing .

let me know how this setup works for you.
i wouldnt mind moving up to 38's i just dont want to install a lift kit