Removing air suspension, replacing with coils

[Egan]

Originally Posted by fyr145

I need the wiring at the compressor end that it plugs into. It looks like is a 24 pin connection and theres another smaller 2 pin connector near it as well. You show it in one of your pics that says you zip tied it to the rear bumper.

Do you still have the bolts to the compressor too, so that I can get mine mounted?

Let me how much shipping is and I can send you payment via Paypal.

Thx,

fyr145

If you need the wiring that goes from the harness I tied up under the bumper to the compressor & solenoid, I have that. I also have the nuts and bolts for the compressors (nuts&bolts for the front of each, nut only for the rear - there are studs built into the mounting plate).

Keep in mind that this is the 2 compressor setup.

Send me a PM with your zip and I'll get a freight quote.

[fyr145]

Originally Posted by Egan

If you need the wiring that goes from the harness I tied up under the bumper to the compressor & solenoid, I have that. I also have the nuts and bolts for the compressors (nuts&bolts for the front of each, nut only for the rear - there are studs built into the mounting plate).

Keep in mind that this is the 2 compressor setup.

Send me a PM with your zip and I'll get a freight quote.

PM sent