A Couple Of Oddities...

[HummerJim]

The red neutral light is a common problem and is related to the buttons getting old. Come to a stop and select 4H and the light will go out - at least that's what the dealer told me to do. Then at a stop cycle through the 4X4 buttons. This is a problem that for many people just seems to go away after time. I had this when my H2 was new and they replaced all the 4X4 buttons under warranty and it was fine for 4 years and started doing it again for a few months and then it stopped on its own and I haven't seen the red neutral light in over a year now. I also got a service 4 wheel drive light once on the message panel with the red light on and the dealer told me to come to a stop, select 4H and the message went out and never came on again. My recirc does the same thing as yours does on a random basis.

[mcioci]

My recirc button does something like that too but figured out that I when I put AC on to wait 2 secs before hitting that recirc button. If u do this it comes on every time and stays on.

[racer24]

My AC recirculation button does the same thing. I have no problem with the lights for 4x4 though. Common problem though.

[jsbihn]

Has anyone thought that the AC recirc is switching off because he might have programmed it that way when setting his seats and such?

I know on my Vette if you program driver 1, the seats, mirrors, radio and a/c all adjust to the programmed driver 1 setting.

I think the H2 does the same thing

[VegasMike]

Originally Posted by jsbihn

Has anyone thought that the AC recirc is switching off because he might have programmed it that way when setting his seats and such?

I know on my Vette if you program driver 1, the seats, mirrors, radio and a/c all adjust to the programmed driver 1 setting.

I think the H2 does the same thing

It isn't off all the time when I start it up, just every now and then.

[jsbihn]

sounds like a programming glitch or possibly a short

given, do you remember if you turned the recirc off prior to shutting it down the last time, could be using the memory last function

[Rico001]

I think the A/C Rec button has to do with the air temp setting on the A/C panel
and the fan speed , plus the outside temp around the truck at the time you use the A/C

~Richard

[VegasMike]

Originally Posted by jsbihn

sounds like a programming glitch or possibly a short

given, do you remember if you turned the recirc off prior to shutting it down the last time, could be using the memory last function

I always leave it on because it blows harder with it on. I think it has more to do with other settings as mentioned above, and not an electrical issue.

With the 4X4 lights, I'm leaning towards either a switch with a intermitant short, or loose wire. Earlier today while sitting in a drive-thru when I had the stereo turned up, the beat of the music was making the neutral light flash. I pressed the 4HI and the light started blinking, then I got the service 4X4 notice on the dash. Shut off and restarted and it went back to normal.