 |
|

09-11-2012, 12:21 AM
|
 |
Hummer Professional
|
|
Join Date: Nov 2009
Location: Windermere, FL
Posts: 297
|
|
Re: Suspension Discussion
When I bought my truck, it already had the Fabtech kit on it. I purchased the FTS kit, with all the upgrades, and my local shop, who builds all kinds of trucks, stated it wasn't worth the switch. They thought Fabtech was the better kit. Had something to do with the spindles. They DID feel that the upgrades were nice, but when comparing just the base kits, Fabtech was the better choice.
I then sold my FTS kit to Seth, the UFC fighter who knocked out Kimbo Slice, and he had all kinds of problems with it. Could never get the alignment right and sold the truck. Even though I took a HUGE hit on the kit, I felt so bad for him.
Before selling the kit, I tried to return it, but FTS wouldn't take it back...even after I shipped it back to them. And let me tell you how helpful they were to me and then Seth. Oh wait, I can't...
__________________
White 2005 SUT, Lifted 7.5" via Fabtech/custom work, Fabtech Dirt Logic 2.25 shocks, 40x15.5x22 Toyo's, black 22" Fuel wheels, 4.88 gears, Dynatech long tube headers, Magnaflow exhaust, Air-raid intake, Superchips programmer, Edlebrock panhard bar, Cognito UCA's, Kryptonite tie rods, Cognito pitman/idlar arm gussets, Hotchkis swaybars and trailing arms, Amp Research steps, E&G fender flares, PIAA SMR's, smoked roof lights (bulbs removed), black suede headliner, 13" JL's under seat
|

09-11-2012, 12:53 AM
|
 |
Hummer Expert
|
|
Join Date: Feb 2011
Posts: 620
|
|
Re: Suspension Discussion
I understand. My truck wants to track right just a hair, it's not bad but enough to bother you at times. It's been aligned numerous times, so that's either as close as it will get, or I need to take it elsewhere. That sucks about FTS's CS, I've read on GMFullsize where someone complained about the same thing. How big was the FTS you ordered?
__________________
'08 Birch White SUT
20X10" BMF S.O.T.A Wheels
38X13.5X20 Toyo Open Country M/T
AMP Research Steps
10" JL Audio sub w/ box and amp
Truxxx Lift 2.5" F-1.5" R
4" Rancho Lift
Corsa Sport Cat Back Exhaust
K&N Cold Air Intake
Spare Removed
RealWheels Eliminator Kit w/o hooks
Defenderworx hooks
Body matched grille
Ford Raptor 6.2L emblem
GS Creations Plexi-glass tail light and front turn tint
RealWheels Oversized Black Hood Handles
Recon Smoked Cab lights
More...
|

09-11-2012, 02:45 AM
|
 |
Hummer Professional
|
|
Join Date: Nov 2009
Location: Windermere, FL
Posts: 297
|
|
Re: Suspension Discussion
I honestly don't remember. It was five years ago.
__________________
White 2005 SUT, Lifted 7.5" via Fabtech/custom work, Fabtech Dirt Logic 2.25 shocks, 40x15.5x22 Toyo's, black 22" Fuel wheels, 4.88 gears, Dynatech long tube headers, Magnaflow exhaust, Air-raid intake, Superchips programmer, Edlebrock panhard bar, Cognito UCA's, Kryptonite tie rods, Cognito pitman/idlar arm gussets, Hotchkis swaybars and trailing arms, Amp Research steps, E&G fender flares, PIAA SMR's, smoked roof lights (bulbs removed), black suede headliner, 13" JL's under seat
|

09-11-2012, 04:59 AM
|
 |
Hummer Professional
|
|
Join Date: Sep 2008
Location: Utah
Posts: 293
|
|
Re: Suspension Discussion
Ah man, what a dreamcrusher. Just when I thought that someone had the brains to make a decent lift for a decent application, you guys educate me. Oh well, guess I will continue my journey to find a custom place to make it. I imagine I wouldn't need to change too much if I was to have just the parts I need custom made, but then again these things can turn into a nightmare if precision is not used, as you mentioned with your alignment.
Thanks for the info though, I thing I will look up the Cognito setup.
__________________
Sweet looking H2 with not enough mods (2003 Pewter H2, 20" Rockstars, 40"x15.5" Toyo MT's, E&G Extended Flares, Full body tube steel exoskeleton, 5" Skyjacker lift, Amp Research steps, Gobi Roofrack and ladders, Smoked LED's, AFe CAI, Dynatech long tubes and cats, Magnaflow exhaust, Stock tune, 4.88 gears, Chrome Grenade Shifter, interior blacked out, rear captains chairs, Solar Power!!)
|

09-11-2012, 02:56 PM
|
 |
Hummer Professional
|
|
Join Date: Nov 2009
Location: Windermere, FL
Posts: 297
|
|
Re: Suspension Discussion
You just need to keep in mind that no kits have everything you'll need or want. If they did, you'd be spending thousands more than the typical kit costs. Think about how many posts there have been about tie-rods, UCA's, trailing arms, panhard bars, sway bars, mounts, gussets, etc. Imagine if all that stuff was included in a kit...
And for a reference, my alignment has been great for years now, and it's been lifted for over 50,000 miles. However, I have made improvements over those miles/years.
__________________
White 2005 SUT, Lifted 7.5" via Fabtech/custom work, Fabtech Dirt Logic 2.25 shocks, 40x15.5x22 Toyo's, black 22" Fuel wheels, 4.88 gears, Dynatech long tube headers, Magnaflow exhaust, Air-raid intake, Superchips programmer, Edlebrock panhard bar, Cognito UCA's, Kryptonite tie rods, Cognito pitman/idlar arm gussets, Hotchkis swaybars and trailing arms, Amp Research steps, E&G fender flares, PIAA SMR's, smoked roof lights (bulbs removed), black suede headliner, 13" JL's under seat
|

09-16-2012, 04:58 AM
|
 |
Hummer Professional
|
|
Join Date: Sep 2008
Location: Utah
Posts: 293
|
|
Re: Suspension Discussion
Charles06, would you mind posting a few pics of your rig? I have yet to see your setup and the more I think about it, the more I think my truck is going in the direction of where yours already is. I would like to see how your wheel wells look with the tires and how your front end looks under there- from your description it sounds like you have some custom work and suspension already on there.
If you are pretty happy with your setup, I would like to see what you have gone through already to get there as I think I am in for some changes pretty soon. If I could get a view of your setup that would be great for me to see how far away I really am from a better setup.
Thanks in advance...
__________________
Sweet looking H2 with not enough mods (2003 Pewter H2, 20" Rockstars, 40"x15.5" Toyo MT's, E&G Extended Flares, Full body tube steel exoskeleton, 5" Skyjacker lift, Amp Research steps, Gobi Roofrack and ladders, Smoked LED's, AFe CAI, Dynatech long tubes and cats, Magnaflow exhaust, Stock tune, 4.88 gears, Chrome Grenade Shifter, interior blacked out, rear captains chairs, Solar Power!!)
|

09-16-2012, 02:19 PM
|
 |
Hummer Professional
|
|
Join Date: Nov 2009
Location: Windermere, FL
Posts: 297
|
|
Re: Suspension Discussion
Let me see what I can dig up. The truck is at the shop right now getting a new steering box, steering pump, ram-assist, and exhaust put on. Are there some specific pictures you'd like to see?
__________________
White 2005 SUT, Lifted 7.5" via Fabtech/custom work, Fabtech Dirt Logic 2.25 shocks, 40x15.5x22 Toyo's, black 22" Fuel wheels, 4.88 gears, Dynatech long tube headers, Magnaflow exhaust, Air-raid intake, Superchips programmer, Edlebrock panhard bar, Cognito UCA's, Kryptonite tie rods, Cognito pitman/idlar arm gussets, Hotchkis swaybars and trailing arms, Amp Research steps, E&G fender flares, PIAA SMR's, smoked roof lights (bulbs removed), black suede headliner, 13" JL's under seat
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 07:20 AM.
|