Bulb change - filament to LED

[[__--MUD--__]]

Originally Posted by smileynialley

Ive just done the doors and the foot wells. for those who want to do this, you do not need to take off any pannels etc. You simply get a flat head screwdriver and pop off each cover to the bulbs and swap over the bulbs. simples.
I'll post a photo a bit later.
One small problem i've encountered is the 2 front dome lights which are now LED lit, only work when the doors are open etc. They will not come on when you press the black buttons. Not sure why.

I'd try putting the stock bulbs back in, see if they function correctly. If they do then you may need to put a resistor or other component inline w/ the led.