Weird prob- video attached

[HUMTECH]

Im thinking hazard/flasher module. it plugs into the back of the left ip fuse block. Its black or grey rectangle box. Try tapping on it with a screw driver handle while signal light is on and solid. If it starts to flash then that's the problem, even if it doesn't start to flash its the most likely culprit

[PaHumBug]

I agree with Humtech. Thermal flasher relay modules are finicky, if they don't have sufficient load they will not flash. But let's hope that the problem is with the flasher unit itself.

[jgmachine]

Thanks... Local parts store did not have the relay, so I had to order online. Funny thing is that the problem has not come back in 2 days. I did try working the hazard flashers when the problem last appeared. Maybe that causes some freak patch on the relay. I will replace nonetheless and hope for the best.