LoJac963's Deuce Build

[LoJac963]

Small update:

I've been wanting to swap out my regular lights on the roof rack to LED, problem has been the height is so limited that finding low profile LED bars has been a problem.

Found these on Amazon for $12 each and they are a lot brighter than the old lights"

Pics:



Comparison, LED is obviously on the left:



Everything installed:



Also added another OTRATTW switch for my radar detector to hardwire it:



Was hoping it would completely cover the factory hole but there's still some visible on the side, oh well....

[H2Miami]

I read through your post .. Funny how people asked to Santa Claus to bring them same aftermarket parts ...

After seeing the final updates I had to said :


PEOPLE WAKE UP HE IS SANTA CLAUS

[LoJac963]

LOL thanks!

[21sH2]

Also, did you have to use a resistor or anything to keep the signals from blinking like a honda? Thanks.

[LoJac963]

I got the tails from Amazon, was the cheapest I could find and the LED bulbs in the lower bumper lights were from DDMTuning.com

I didn't have to add resistors but the tail lights and lower bumper lights blink opposite from each other when the turn signal is on and the brake is depressed. Why....I can't figure it out but other people running these tails have the same issues. I'm still trying to work out a fix but I don't have much time right now.

[LoJac963]

Latest Update:

Made a bracket from flat steel and installed 2 lights behind the mini grill:





I also added LED's to my lower fog light grill so everything matches, new grill lights and lower fog LED's:



Finally bought an AirDoc. I had to shorten the tube on each side because the Volant box pushed the MAF closer. I took off 2" at the box side and 1" at the engine side. Looks so much better without the giant stock tube/resonator:





That's it for right now. I still have other projects waiting to be installed.....

[DRTYFN]

You've done a lot of very nice work upgrading your baby.

I know you spent a lot of time researching the LEDs for your dash and buttons. Could you share the part numbers/specs and quantities? I'm lazy.