That reminds me. I ordered some heavy duty 36" drawer slides and am going to get my dad to help me build a custom box to put in the back. I am not spending $1500 on the one that's being offered out there and it not satisfy my needs.
It's going to have a magnetic controlled fail secure dead bolt lock with a hidden remote release switch. I also bought a stainless steel 30" bar to use as the pull handle. I am thinking of building it out of 1" laminated fiberglass or 3/4" plywood and 2x4s. Build some moveable dividers in the drawer and have a recessed rifle storage underneath the drawer. The drawer will have to be raised off the floor of the truck to clear the bottom of the back where the door latches, leaving a "hidden" place underneath the drawer.
Not to be hi-jacking the thread or anything, but anybody have any other good ideas for this tool drawer. It will be similar to the one Jason is selling here:
http://www.h2source.com/201-400-2.htm
Mine will have dividers in the drawer, no visible lock and a pull handle that goes all the way across the front of the drawer.
01-18-2005, 03:52 PM
Posting Rules
Hybrid Mode