Pitman Arms?

[FrgMstr]

Great information Don! Thanks for sharing.

I have 37 BFG Mud Terrains on my H2. They have gotten some very solid work outs in the last few weeks.

They rub in a couple of places in the wheel wells, but none I would considered bad. I did have one catch a peice of the fender flair and rip the edge but a bit of work with the dremel tool fixed it so that you cannot tell and will not happen again.

But back to the Pitman arms. Putting my AT tires back on for street use I did look and try to feel for pitman wear while doing the rotation. I did not find anything that I would have considered "wrong". Then again, I did not check in the way you have mentioned but I will next time I have the truck on the jack.

I know Jim has had his pitmans replaced since I installed my 37s and mine have never been replaced and the truch has 13K miles on it. 3K of that with 37s and three good off roading trips. I am not seeing the same wear that Jim is. Also I have never touched my torsion bars. They are still factory set.

Anyway, hope this helps.