|
#1
04-24-2006, 11:33 AM
Hummer Guru
Join Date: Dec 2002
Location: Anywhere you're not!
Posts: 5,006
I noticed it when we stopped for gas yesterday, but didn't pay much attention.
The vehicle comes to a halt in tight turns. The tighter the turn, the more resistence I'm getting. It feels pretty weird but doesn't seem to be interfering with the vehicle too much.
Any ideas?
__________________
#4
04-24-2006, 01:55 PM
Hummer Guru
Join Date: Dec 2002
Location: Anywhere you're not!
Posts: 5,006
Good question. I think it's worse to turn left than right.
__________________
#8
04-24-2006, 02:58 PM
Hummer Guru
Join Date: Dec 2002
Location: Anywhere you're not!
Posts: 5,006
They do appear normal and the truck seems to drive okay when going straight or making slight turns. It only occurs when I am turning tight.
Figure it's okay to drive until it breaks?
__________________
#9
04-24-2006, 03:10 PM
Banned
Join Date: Jan 2003
Posts: 24,247
I'm betting it's the CV. It's "tightening" up for some reason when you turn tight. Take a quick look at the boots and see if you have any tears. You might have torn one on something and over time water/dirt/grit contaminated it. Or it could just be the bearings going out.
#12
04-24-2006, 06:19 PM
Hummer Guru
Join Date: Dec 2002
Location: Anywhere you're not!
Posts: 5,006
The boots on the CVs look okay and the sway bar is defintely in place.
__________________
#13
04-24-2006, 06:46 PM
Hummer Expert
Join Date: Mar 2005
Location: Colorado
Posts: 757
Definately a CV joint issue, if you're out of warranty, take it off and have it rebuilt at a drive train specialist for under $100. It is probably contaminated grease causing the balls to stay in the grooves of the cage.
__________________
1999 AMGeneral H1 6.5TD BLACK Wagon e-Lockers Front and Back, Rubberduck4x4 RockTubes, Extended Undercarriage Protection,"Big Duck" 2" body lift/2 1/2" suspension lift, 41" IROK Radials on 17" Cepeks w/Rock Rims, (in process)Centered front diff, 3.08 gears, 12k Brakes and 12k halfshafts
#14
04-24-2006, 06:53 PM
Hummer Guru
Join Date: Dec 2002
Location: Anywhere you're not!
Posts: 5,006
The warranty will cover it, I'm sure. I will try to get it in to the shop tomorrow.
__________________
#15
04-24-2006, 08:44 PM
Hummer Veteran
Join Date: Aug 2005
Posts: 184
Tire pressures good? Not in 4Hi lock?
#16
04-24-2006, 08:47 PM
Hummer Guru
Join Date: Dec 2002
Location: Anywhere you're not!
Posts: 5,006
Quote:
Originally posted by Planohummer:
Tire pressures good? Not in 4Hi lock?
Checked and checked.
__________________
#18
04-25-2006, 02:23 AM
Hummer Messiah
Join Date: Apr 2003
Location: Virginia Beach
Posts: 37,474
Adam, you were really struggling to turn your truck while in Moab. Much more than we were when we were aired down.
Get that thing fixed, buddy.
__________________
"My reading of history convinces me that most bad government results from too much government."---Thomas Jefferson
#19
04-25-2006, 01:47 PM
Hummer Guru
Join Date: Dec 2002
Location: Anywhere you're not!
Posts: 5,006
In the shop now.
__________________
#20
04-25-2006, 03:24 PM
Hummer Guru
Join Date: Dec 2002
Location: Anywhere you're not!
Posts: 5,006
So, they're telling me the truck is locked in 4 Hi. ???
__________________
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 09:34 AM.
Linear Mode
