Can somone offer me a wiring diagram for the (OEM extra fog lamp switch) located under the headunit so i can replace the PIAA swith.
Or just tell me where to connect the PIAA wires to (OEM extra fog lamp switch) located under the headunit .
I searched the forum but no clue
Please Help Me With This Issue
- HUMMER H3 Lux/Pkg (Boulder Gray) 2006
- Audi Q7 (White) 2009
Last edited by DoubleAction : 01-29-2009 at 08:27 AM.
http://www.classictruckshop.com/club...h/foglites.htm
You can get one of these relays for under $5.00 however the install requires some experience with wire connectors and soldering to avoid problems with shorts. Care should be used in picking a open location to mount the relay in a accessible and clear area under the hood. Not under the dash.
The illustration shows the bosch 5th pin 87a which is not needed for this application...
"For God so loved the world he gave his only son that whoever believe in him would not perish but have everlasting life. "
(John 3:16)
2006 H3 Slate Blue,Header,Jacked,CAI,Toyo35's,HHO.
Priors...
Explorer
Commander
71 Vette
You Name it!
Last edited by wpage : 01-29-2009 at 03:20 PM.
A B C A=ground
B=accesories
C=12 volt +
I hooked up four Eagle Eye lights and used two OEM switches
A B C A=ground
B=accesories
C=12 volt +
I hooked up four Eagle Eye lights and used two OEM switches
Thanks Pal,
But how can i know wich is A B C on the OEM?
Are They writen on the OEM switch
- HUMMER H3 Lux/Pkg (Boulder Gray) 2006
- Audi Q7 (White) 2009
Thank you so much
- HUMMER H3 Lux/Pkg (Boulder Gray) 2006
- Audi Q7 (White) 2009
Thread Tools
Search this Thread
Display Modes
Posting Rules