The shift that always bugs me is the slow speed downshift from 2 to 1. Example. You pull out of the driveway and slowly accellerate up to 20 or so then hit the brakes and slow for a turn, after the turn the H2 is in 2nd gear and you have to press the pedal almost all the way to the floor in order to get a downshift to first which is then very Violent. This is VERY VERY VERY annoying.
I want it to pop down to first easier, with less pedal pressure. Is there any programer that will do this? Does the hypertech just automaticly fix this lame problem???
--John
2006 Hummer H2 Lux Series
www.JohnHasMoreFun.com
1/4 Mile 15.29@91.34mph
Mods:
Magnusun Radix Supercharger!!!
Switch to allow full Nav Controls while moving
Warn 9.5 Winch
Best bet is to lower gearing to 4.56:1 to take load off of lower of the two gears
--John
2006 Hummer H2 Lux Series
www.JohnHasMoreFun.com
1/4 Mile 15.29@91.34mph
Mods:
Magnusun Radix Supercharger!!!
Switch to allow full Nav Controls while moving
Warn 9.5 Winch
--John
2006 Hummer H2 Lux Series
www.JohnHasMoreFun.com
1/4 Mile 15.29@91.34mph
Mods:
Magnusun Radix Supercharger!!!
Switch to allow full Nav Controls while moving
Warn 9.5 Winch
Thread Tools
Search this Thread
Display Modes
Posting Rules