H20 Guy's goods

[PARAGON]

Originally Posted by timgco

sweet! Do you have any shots away from the truck to get percpective on the look of sliders and truck together. Underside pic also? Who made these?

He did. And you can mount U-steps to them.

The A-frame bracket protection is schweet. I needed that this weekend also.

[2-H2's]

Originally Posted by PARAGON

He did. And you can mount U-steps to them.

The A-frame bracket protection is schweet. I needed that this weekend also.

I saw your front bumper on another forum... These would have made a big difference from what I saw. I tested them on the Hummer course here & can't wait to see how they perform at ORV this weekend.

[CO Hummer]

2H,

What is #2 below covering? I don't get it.

Also, #1 - those bolts are exposed and will get sheared off with any amount of real wheeling. Have you done anything about that?

[KenP]

#2 is the diff cover

Haven't had trouble with the bolts yet.

[2-H2's]

Originally Posted by CO Hummer

2H,

What is #2 below covering? I don't get it.

Also, #1 - those bolts are exposed and will get sheared off with any amount of real wheeling. Have you done anything about that?

#2 is the fabtech front diff skid plate.

#1 bolts never touched anything at K-Rocks...plus I just added the two control arm supports to prevent damaging them, which stick out 2-3" from those bolts. I'm running a lifted SUT w/ 38's...the only damage so far wheeling has been my right rear E&G fender flare (which I trimmed flush with the bumper on both sides now) & my control arm tabs on the fabtech lift kit.

[CO Hummer]

Originally Posted by 2-H2's

#2 is the fabtech front diff skid plate.

#1 bolts never touched anything at K-Rocks...plus I just added the two control arm supports to prevent damaging them, which stick out 2-3" from those bolts. I'm running a lifted SUT w/ 38's...the only damage so far wheeling has been my right rear E&G fender flare (which I trimmed flush with the bumper on both sides now) & my control arm tabs on the fabtech lift kit.

Ahhhhhhhhhhhh. I see now. I wasn't paying attention to the fact that you have a lift. That is very nice. Those Fabtech kits leave you really exposed. Thanks!

[2-H2's]

Originally Posted by CO Hummer

Ahhhhhhhhhhhh. I see now. I wasn't paying attention to the fact that you have a lift. That is very nice. Those Fabtech kits leave you really exposed. Thanks!

That's the reason for the added protection up front...the control arm tabs on the lift come in contact with everything on the trail. I'll find out this weekend if the added protection actually works.

If you have any ideas to correct these issues, by all means speak up...

[2-H2's]

If these latest mods work out...then it's on to the CL issue

[KenP]

Pee really causes rust.