F/S Kumho 37x13.50-20 mud terrains

[FGHT ON]

Do you have any other pictures of the actual tires and any close ups of the tread?

[Boss Hoss]

Sorry guys but the tires are SOLD!

[trofeo16]

I have the same tires on my truck. The truck is stock ride hide with no turns to the torsion bars. There is some rubbing when you turn more than 3/4 left or right. Reverse a lil more ruybbing than that. Tires are quiet all things considered on the highway.

[Boss Hoss]

Originally Posted by trofeo16

I have the same tires on my truck. The truck is stock ride hide with no turns to the torsion bars. There is some rubbing when you turn more than 3/4 left or right. Reverse a lil more ruybbing than that. Tires are quiet all things considered on the highway.

Wheel backspacing will make a difference as to if your tires rub and believe it or not but some trucks rub when others do not all things equal. I was really dissappointed in the width of this tire, as they are really a 12.50 but this lessens the likelyhood of the tire rubbing when compared to an actual 13.50 wide tire. I am being subsidized the difference of the cost of the tires(new) and the price i sold them due to innacurate specs.

[trofeo16]

On the tirerack website they measure 13.5 true width but on Kumhos website they measure the 12.5. Do you know how they actually measure the tire? If I wanted to take a tape measure where do I start and finish?

[Boss Hoss]

Originally Posted by trofeo16

On the tirerack website they measure 13.5 true width but on Kumhos website they measure the 12.5. Do you know how they actually measure the tire? If I wanted to take a tape measure where do I start and finish?

Section width is the overall width of the tire, not limited to tread. You can put a 2x4 on each side of the tire and measue the distance, or you can used weighted string or however else you want to measure; results should be the same. They are actually 12.50-12.75 not 13.50 which is why im getting some $$$ from Tire Rack as their specs are wrong.

[Knass34]

Originally Posted by Boss Hoss

Section width is the overall width of the tire, not limited to tread. You can put a 2x4 on each side of the tire and measue the distance, or you can used weighted string or however else you want to measure; results should be the same. They are actually 12.50-12.75 not 13.50 which is why im getting some $$$ from Tire Rack as their specs are wrong.

If you don't mind me asking, what rim/tire combo are you running now? I've ordered 35x13.5x20 Micky Thompsons. Curious if I've chosen correctly.

Kal