Anyone want to help an idiot?

[ryanh2]

77 people looked at this and not one is able to help me. Is it that you feel I should be able to do this myself? I guess I will give it a shot.

[ROX]

Originally Posted by ryanh2

77 people looked at this and not one is able to help me. Is it that you feel I should be able to do this myself? I guess I will give it a shot.

I guess no one wants to help an idiot.

If you search on the forum you will find a detailed description, complete with pictures of how to do this modification. Go to Radio shack and get the diode and a piece of wire. I'm sure you'll do just fine. :fingerscrossed:

good luck

[Tex_h2]

U don't need anything special...

grab a good piece of wire, strip both ends. Check out the pics for the previous post on DRL's ...insert wire in one fuse, and the other in the other fuse....done.

[timgco]

I just went through the old thread. I couldn;t find the one thread with pics of how it was done, but did find one thread with this pic.

Hope that helps somewhat. I'll be doing this mod again...once an SUT land in my garage again. I'll make a couple up and can send you one of you don;t get it handled by than...maybe a couple months yet.

for now, you an always just do the mod with the wire. I never did the diode setup, but did end up going through markerlight bulbs a couple times. I'm going to sue the diode this time so teh mraker lights stay off durring the day.

[ryanh2]

thank you. I understand the wire part. Thats easy enough. I get lost when you add in the diode. I have read the old thread a few times and it seems that everyone has different configurations. I guess I will figure it out. Thanks again.

[OrangeCrush]

I made 4 extra and mailed them to members for free. If I had any more, I'd make some up and mail them.

Look it up, that thread will give you part numbers. It's easy as pie.

As far as installing it, just read the instructions cause if we mailed one to you, you'd have to install it yourself anyways.

Mark

[FUTP]

All you need is about a 4 inch wire both ends stripped.