fog lights and daylight running lights

[FUTP]

go HID or follow the diagram for hummer day time running lights on at night simple and you wont need a diode .............

[timgco]

Old SUT thread of mine
http://www.elcovaforums.com/forums/s...ad.php?t=13963


House of Hummers thread
http://www.elcovaforums.com/forums/s...t=22161&page=2

DRL mod
http://www.elcovaforums.com/forums/s...hlight=drl+mod

...took two seconds with teh SEARCH button.

[sharkman]

timgco - you SUT is SAH-WEET!!!!!

I love what you did with the PIAAS. So, the (4) fog/driving lamps,they are all PIAA 004XT? did you have any problems with clearance with the hood open or closed? How did you mount them (brackets, drilled right into the bumper, etc). if it isn't too much trouble, would you mind sending a pic with the hood open so i can check out the clearance of the lights. That mod is so much better looking than the DRLs. Thanks! for some reason, I couldn't find the house of hummers thread until you posted it, so thank you!

[timgco]

you have to dremel out the small holes in that lower grille, but it clears with room to spare.

You'll also have to use a 2 x 2 aluminum plate that will bolt through the plastic bumper. The lights will bounce if you don;t bolt it properly. I don;t have any other pics.

I'll be using an LED lightbar on the next truck. There is pleanty of room in there, you just have to keep it towards the back of the plastic as far as you can. piaa 2100, 1500, 004xt's will all fit.

[sharkman]

excellent! I will post pics as soon as I have this complete. thanks again!