Is it just a chrome cover???

[guruerror]

Originally Posted by ROUSHDEMON

Cool!, thanks for doing that man, let me know if you find out.

Unfortunately I didn't get the opportunity to pop this off before re-installing my door panel. Line-X was a day late getting the spray job done and I had to slap in on and head out for a trip.

Also, unfortunately, the EPC diagram doesn't show much:



There are two different part numbers which apply to the whole 'pocket' (one for chrome and one for black). The cover is not shown as a seperate part number. I'd still bet there's 2 or 3 clips and some 3M double-stick tape holding it on. If you remove part #24 (see the diagram) can you see any clips up in there? Maybe the pocket doesn't need to come out to get the chrome bit off.

If not it's probably easier to just tape it off and spray it...unless you're really bored...and really anal...(like me).

[ROUSHDEMON]

yeah.... got too many other projects to deal with before doing all that...

I'll just go for this:

[guruerror]

Yep...just a chrome cover. Six pieces of double-stick tape and some caulk is all that holds it on.

The black plastic underneath is textured just like the rest.



Get your favorite putty knife and start prying in the middle...that's where the biggest lump of caulk is...then work it toward each end. The caulk is a pain in the ass to get off.

[seventwozero]

Get your favorite putty knife and start prying in the middle...that's where the biggest lump of caulk is...then work it toward each end. The caulk is a pain in the ass to get off.