How much for a set of LE steps?

[twinmill28]

Nah, it wasn't my idea---I was just putting two and two together, literally.
I just really liked your idea of leaving the moldings on, but thought moving the rails out would be even better.
I've got access to a slick liquid cooled metal bandsaw, so cutting the spacers would be cake! Clamp 'em in and let the saw slowly drop x 20 or so. Drilling out the half inch holes x 20 would suck, not as much on a drill press, but none-the-less it would suck.
I'd recommend finding a good nut and bolt supply place if you've got one in the area. This will save you ALOT of money versus buying grade 8 hardware at Lowes or Home Depot. We had a place in Utah, Nut and Bolt Supply (Of all things!) that had incredibly cheap prices---I was able to get a bucket load of stainless stuff for less than half of Lowes!
I wasn't going to pursue moving my rails out as I've got the U-steps and they've been working well for me. But the more I think about it, I'm really tired of touching up and the rock chips on the body from the tire flinging rocks. I'm thinking moving these out an 1-1/2" will give some good protection. Plus, it just occurred to me that along with access to the saw, I've also got access to the square tube, so I'll just need to buy the hardware. Win win!

[seventwozero]

If you're considering breaking the package up to get it to move, I would be interested in the side moldings. This might make the steps easier to move, although I'm guessing you would be stuck with the rails as they are a fairly common part.

Shoot me a PM if you like.

[OrangeCrush]

Originally Posted by seventwozero

If you're considering breaking the package up to get it to move, I would be interested in the side moldings. This might make the steps easier to move, although I'm guessing you would be stuck with the rails as they are a fairly common part.

Shoot me a PM if you like.

I?ve got someone that ones the steps and you want the moldings, I would consider it.

Guess I need to come up with a fair price.


Mark

[seventwozero]

Originally Posted by OrangeCrush

I?ve got someone that ones the steps and you want the moldings, I would consider it.

Guess I need to come up with a fair price.


Mark

FWIW, The moldings will need to be shipped up to me. I'm not really concerned about the cost involved with that, I've shipped SMA light bars for $30 via FedEx. Getting them secured so they can't flex and break might be the hard part.